Hot cut dies plastic compound
01-20-2017, 02:44 PM,
#1
Hot cut dies plastic compound
dear all,
my customer needs to spray the part called : Hot cut dies plastic compound as per drawing attached.
please let me know if any of you have ever done this kind of spraying job.
your early reply is highly appreciated.



Attached Files
.pdf   Detail Thermal Spray.PDF (Size: 865.73 KB / Downloads: 640)
Thanks and regards,
Iwan Sedaryawan | Director Cipta Agung CV | HP : +62 (0) 818504137 - 81357725946-08117019540 - | PIN BB : 2AD850B7| Skype : iwan.sedaryawan |Email : sedaryawan@ciptaagung.com | sedaryawan@yahoo.com | sedaryawan@gmail.com | Web-site : https://www.ciptaagung.com
Reply
01-20-2017, 03:07 PM,
#2
RE: Hot cut dies plastic compound
Dear Mr. Sedaryawan,

Greetings. I have see this type of part in the past, its quite an expensive part to replace if the customer buys new. I have never done this as the substrate is so very hard (difficult for surface preparation) and the final machining tolerances are a challenge on such a hard surface.

Would be great if someone had some experience and a solution.


(01-20-2017, 02:44 PM)Iwan Sedaryawan CA Wrote: dear all,
my customer needs to spray the part called : Hot cut dies plastic compound as per drawing attached.
please let me know if any of you have ever done this kind of spraying job.
your early reply is highly appreciated.

Reply
01-20-2017, 05:29 PM,
#3
RE: Hot cut dies plastic compound
Hi Iwan
It seem a polymer thermal spray coating application, that has as function to resist temperature shocks, impact, abbrasion, thermal insulation and corrosion protection, and this kind of coating could be applied by Resodyn or Ibeda thermal spray systems guns
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Reg: Anti stick coatings for moulds and dies. Dileep 4 5,570 01-04-2016, 03:26 PM
Last Post: djewell
  The coating problem of screw in exhaust plastic extrusion granulator 657666143 2 4,643 11-19-2013, 07:42 AM
Last Post: 657666143
  Plastic Spraying KevGarty 5 6,173 04-08-2013, 11:55 AM
Last Post: loriolo
  Plastic Coating over flow / over spray hafizAR85 0 3,452 02-20-2012, 09:03 AM
Last Post: hafizAR85
Shy PU Coating for plastic LeeWL 2 5,741 02-02-2009, 08:47 AM
Last Post: LeeWL
  Coatings for forging dies Marcio Matos dos Santos 1 6,739 10-31-2006, 06:24 PM
Last Post: Gordon



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd