Starting parameters for Amdry 718 Cl.B
03-30-2020, 05:35 AM, (This post was last modified: 03-30-2020, 05:38 AM by edrazee.)
#1
Starting parameters for Amdry 718 Cl.B
Hi All

Does anyone have the starting parameter for Amdry 718 Cl.B for F4 gun. The one that i received from Metco is for Connex F100 gun. Is it interchangeable?

Thanks in advance!


Regards
Ed
Reply
03-30-2020, 12:57 PM,
#2
RE: Starting parameters for Amdry 718 Cl.B
Sorry I do not have the F4 parameters, but as far as being interchangeable with F100, no. The F100 is an ID torch. Why not ask Oerlikon again?
Reply
03-31-2020, 07:09 PM,
#3
RE: Starting parameters for Amdry 718 Cl.B
Hello ED
Try with the following parameters, I just settled them for an aeronautic industry with a very good result, as parameters are sensible to different source of gases, equipment state and geometry, and enviromental conditions, if you don't reach specification values, I can help you to change some parameters in order to reach tjhe request values, try as follow:
Powder type Amdry 718clB – Ni19Cr18Fe5NbTa3Mo0,5Al1Ti0,5C – (-90 + 45 µm)
Gun type F4Mb - Injector 1,8mm – 90° - Injector distance 6mm – Current 512 A – Volt 64 V– A 58 slpm (5 Bar) – H2 15 slpm (5Bar) -Spreader/ suction L/L – Ar 6,5 (3,4 bar) – Powder feed rate 54 g – Disc Speed 53 – Stirrer speed 60 – spray distance 118 mm – Gun speed > 7,52 m/min
Best regards
Luigi
Reply




Possibly Related Threads…
Thread Author Replies Views Last Post
  Amdry 956 Hardness Benjamin101 3 1,509 04-11-2023, 04:42 PM
Last Post: paikhuan
  3MBTD Amdry 995C parameters Max K 0 856 10-04-2022, 08:38 PM
Last Post: Max K
  Amdry 9951. Anyone know the maximum coating thickness Antcarroll 2 2,251 01-29-2021, 08:17 AM
Last Post: loriolo
  Amdry 9954 for titanium based alloy Bharti Malvi 6 6,097 12-21-2016, 07:39 PM
Last Post: Bharti Malvi
  Amdry 962 and Metco 204 NS parameters F1 45° giuiori75 2 10,801 03-24-2016, 04:31 PM
Last Post: Max K
Shy TBS for Metco 450NS and AMDRY 2010 alvliew 3 5,314 06-14-2015, 10:59 PM
Last Post: Johnny_Blaze
  AMDRY 1718- Hardness alvliew 4 8,325 03-13-2015, 11:21 PM
Last Post: loriolo
  Melting, unmelted AlSi Microstructure Amdry 2010 powder William 4 7,179 08-26-2010, 04:00 PM
Last Post: Gordon
  Starting thermal coating facility. turbo 6 8,012 06-28-2010, 04:13 PM
Last Post: Gordon
  AMDRY 500F AYKAC 1 5,104 03-01-2010, 12:26 PM
Last Post: Gordon
  Amdry 2010 & Metco 601 ykang 2 7,771 06-17-2008, 06:38 AM
Last Post: ykang



Users browsing this thread: 1 Guest(s)





Surface Engineering Forum Sponsor - Alphatek Hyperformance Coatings Ltd